Ripple Fisher Big Tuna Japan Special
The Ripple Fisher Big Tuna Japan Special range represents the pinnacle of offshore rod design, built specifically for anglers chasing the largest and most powerful tuna species in the world. Developed through years of testing with experienced anglers and charter operators, this series is designed to meet the demands of modern big game fishing.
At its core, the Big Tuna series focuses on achieving the balance between casting performance and extreme lifting power. Using advanced carbon materials and refined taper designs, these rods are built to handle high drag pressures while still allowing anglers to cast effectively when fish are feeding on the surface.
The latest Japan Special models have been updated to reflect the evolution of tuna fishing. With anglers now regularly fishing heavy PE lines and targeting larger fish, these rods are designed to remove previous limitations. They allow for techniques such as straight pumping and sustained high drag pressure, giving anglers the ability to control and lift fish from depth more efficiently.
Each model in the range is tuned for specific applications, from long casting situations through to heavy fight-focused setups. Rather than simply increasing power, Ripple Fisher has focused on combining different carbon materials and taper designs to create rods that load correctly, recover efficiently and maintain strength throughout the blank.
On the water, the result is a rod that feels powerful but controlled. It allows you to cast lures effectively, stay connected to the fish and apply pressure when it matters most. The strong butt section provides lifting power, while the overall balance reduces angler fatigue during long fights.
Whether you’re targeting bluefin tuna exceeding 100kg or pushing into extreme heavy tackle scenarios, the Ripple Fisher Big Tuna Japan Special range is built to handle it. This is a serious rod series for anglers who demand performance at the highest level.
FEATURES AND BENEFITS
Advanced carbon blank construction delivers extreme strength and lifting power, allowing anglers to handle large tuna under high drag pressure.
Refined taper design improves load distribution and recovery, enhancing both casting performance and fighting ability.
Designed for heavy PE line classes, supporting modern big game fishing techniques and high drag applications.
Powerful butt section provides the strength needed to lift fish from depth while maintaining control during long fights.
Balanced rod design reduces angler fatigue, allowing for extended fishing sessions in demanding offshore conditions.
Model-specific tuning ensures the range covers both long casting and heavy fight-focused applications.
Developed through real-world testing with anglers and charter operators, ensuring proven performance on large tuna species.
BIG TUNA 85F JAPAN Special
This 85F will allow anglers to cast out small lures with great distance with the use of lines between PE3~6 and lures ranging from 18g ~ 120g. It is a tenacious and bendy rod so it is less likely for anglers to break the rod when high sticking. Use of general light tuna rods result in a long and grueling fight as angles are worried about rod breakage or line breakages, however, this 85F is not a light tackle rod. It is a new generation of tuna rods which exceed the line and knot breakage specifications. Although it possesses the power to overcome Tuna exceeding 50kg, this tolerant rod will also be ideal for casting for targets such as Yellow-tails and Kingfish in your local waters.
| Target | Tuna～50㎏・Kingfish |
|---|---|
| Specification | Titanium frame K Guide + Super Ocean Guide（Fuji） |
| DragMax | 10kg/45° |
Suitable reel size S・D：8000~14000 / D：4500~6500
Grip length / 798mm(Grip full length)・520mm(From grip end to reel foot)
Dia of tip / 2.5mm(Just below top guide)・Dia of butt / 14.3mm (Butt diameter measured 867mm from the bottom of tip section)
Reel seat / DPS20（Fuji）Down Lock
BIG TUNA 87AS JAPAN Special
As its name suggests, the AS (Accuracy Shot) model is designed to accurately cast lures into the feeding fish. In addition to the steady blank kick-back after casting, Ripple Fisher have equipped two RV guides on the butt enabling an extremely smooth line ejection from the reel through to the rod. The casting ability will support anglers when the feeding frenzy is far or in heavy conditions casting into the wind. It is not only able to cast large lures but the blank will also allow the use of small 40g size lures. This middle class rod will assist anglers with its taper design ideal to slowly but surely lift the fish from the deep while being able to high-stick the rod. It is an ideal rod to target Tuna around 50~60kg.
| Target | TUNA ~70kg・Kingfish |
|---|---|
| Specification | SiC-S Titanium frame K Guide + RV Guide（Fuji） |
| DragMax | 15kg/45° |
Suitable reel size S・D：14000~18000
Grip length / A：838mm(Grip full length)・B：520mm(From grip end to reel foot)
Dia of tip / 3.1mm(Just below top guide) ・Dia of butt / 15.1mm (Butt diameter measured 915mm from the bottom)
Reel seat / DPS20(Fuji) Down Lock
BIG TUNA 83 JAPAN Special
This model was developed with “lure control” and “fight” as its main focus, but it goes without saying that casting is also outstanding. It is a PE6~8 middle class rod not only able to pinpoint cast but also able to utilize small mouthed diving poppers and diving pencils required for an attack. You will be able to realize the evolution of our BIG-TUNA series with its lightness and outstanding balance, allowing anglers to cast all day long. Furthermore, the bending point is set close to the body enabling anglers to easily bend in and capitalize on the butt power with little effort.
| Target | Tuna~80㎏・KingFish |
|---|---|
| Specification | SiC Ocean Guide (Fuji) |
| DragMax | 15kg/45° |
Suitable reel size S・D：14000~18000 / D：5500~6500
Grip length / A：833mm(Grip full length)・B：520mm(From grip end to reel foot)
Dia of tip / 3.3mm(Just below top guide) ・Dia of butt / 14.6mm (Butt diameter measured 915mm from the bottom)
Reel seat / DPS20(Fuji) Down Lock
BIG TUNA 86 JAPAN Special
If you require long and accurate casting with a heavy class tackle, this 86 will be your choice. In comparison to your ordinary heavy tackle, the flexible tip on the 86 will allow for easier casting of smaller lures when the bait-fish are small though the Tuna are huge. The bending point (pivotal point) is closer to the body allowing anglers to take initiative during the fight.
| Target | TUNA～100kg |
|---|---|
| Specification | Super Ocean Guide(Fuji) |
| DragMax |
15kg/45° |
Suitable reel size S・D：18000~30000
Grip length / 833mm(Grip full length)・520mm(From grip end to reel foot)
Dia of tip / 3.3mm(Just below top guide)・Dia of butt / 15.9mm (Butt diameter measured 920mm from the bottom of tip section)
Reel seat / DPS20（Fuji）Down Lock
Grip end / BRC22
Original: $1,029.00
-65%$1,029.00
$360.15More Images
Ripple Fisher Big Tuna Japan Special
The Ripple Fisher Big Tuna Japan Special range represents the pinnacle of offshore rod design, built specifically for anglers chasing the largest and most powerful tuna species in the world. Developed through years of testing with experienced anglers and charter operators, this series is designed to meet the demands of modern big game fishing.
At its core, the Big Tuna series focuses on achieving the balance between casting performance and extreme lifting power. Using advanced carbon materials and refined taper designs, these rods are built to handle high drag pressures while still allowing anglers to cast effectively when fish are feeding on the surface.
The latest Japan Special models have been updated to reflect the evolution of tuna fishing. With anglers now regularly fishing heavy PE lines and targeting larger fish, these rods are designed to remove previous limitations. They allow for techniques such as straight pumping and sustained high drag pressure, giving anglers the ability to control and lift fish from depth more efficiently.
Each model in the range is tuned for specific applications, from long casting situations through to heavy fight-focused setups. Rather than simply increasing power, Ripple Fisher has focused on combining different carbon materials and taper designs to create rods that load correctly, recover efficiently and maintain strength throughout the blank.
On the water, the result is a rod that feels powerful but controlled. It allows you to cast lures effectively, stay connected to the fish and apply pressure when it matters most. The strong butt section provides lifting power, while the overall balance reduces angler fatigue during long fights.
Whether you’re targeting bluefin tuna exceeding 100kg or pushing into extreme heavy tackle scenarios, the Ripple Fisher Big Tuna Japan Special range is built to handle it. This is a serious rod series for anglers who demand performance at the highest level.
FEATURES AND BENEFITS
Advanced carbon blank construction delivers extreme strength and lifting power, allowing anglers to handle large tuna under high drag pressure.
Refined taper design improves load distribution and recovery, enhancing both casting performance and fighting ability.
Designed for heavy PE line classes, supporting modern big game fishing techniques and high drag applications.
Powerful butt section provides the strength needed to lift fish from depth while maintaining control during long fights.
Balanced rod design reduces angler fatigue, allowing for extended fishing sessions in demanding offshore conditions.
Model-specific tuning ensures the range covers both long casting and heavy fight-focused applications.
Developed through real-world testing with anglers and charter operators, ensuring proven performance on large tuna species.
BIG TUNA 85F JAPAN Special
This 85F will allow anglers to cast out small lures with great distance with the use of lines between PE3~6 and lures ranging from 18g ~ 120g. It is a tenacious and bendy rod so it is less likely for anglers to break the rod when high sticking. Use of general light tuna rods result in a long and grueling fight as angles are worried about rod breakage or line breakages, however, this 85F is not a light tackle rod. It is a new generation of tuna rods which exceed the line and knot breakage specifications. Although it possesses the power to overcome Tuna exceeding 50kg, this tolerant rod will also be ideal for casting for targets such as Yellow-tails and Kingfish in your local waters.
| Target | Tuna～50㎏・Kingfish |
|---|---|
| Specification | Titanium frame K Guide + Super Ocean Guide（Fuji） |
| DragMax | 10kg/45° |
Suitable reel size S・D：8000~14000 / D：4500~6500
Grip length / 798mm(Grip full length)・520mm(From grip end to reel foot)
Dia of tip / 2.5mm(Just below top guide)・Dia of butt / 14.3mm (Butt diameter measured 867mm from the bottom of tip section)
Reel seat / DPS20（Fuji）Down Lock
BIG TUNA 87AS JAPAN Special
As its name suggests, the AS (Accuracy Shot) model is designed to accurately cast lures into the feeding fish. In addition to the steady blank kick-back after casting, Ripple Fisher have equipped two RV guides on the butt enabling an extremely smooth line ejection from the reel through to the rod. The casting ability will support anglers when the feeding frenzy is far or in heavy conditions casting into the wind. It is not only able to cast large lures but the blank will also allow the use of small 40g size lures. This middle class rod will assist anglers with its taper design ideal to slowly but surely lift the fish from the deep while being able to high-stick the rod. It is an ideal rod to target Tuna around 50~60kg.
| Target | TUNA ~70kg・Kingfish |
|---|---|
| Specification | SiC-S Titanium frame K Guide + RV Guide（Fuji） |
| DragMax | 15kg/45° |
Suitable reel size S・D：14000~18000
Grip length / A：838mm(Grip full length)・B：520mm(From grip end to reel foot)
Dia of tip / 3.1mm(Just below top guide) ・Dia of butt / 15.1mm (Butt diameter measured 915mm from the bottom)
Reel seat / DPS20(Fuji) Down Lock
BIG TUNA 83 JAPAN Special
This model was developed with “lure control” and “fight” as its main focus, but it goes without saying that casting is also outstanding. It is a PE6~8 middle class rod not only able to pinpoint cast but also able to utilize small mouthed diving poppers and diving pencils required for an attack. You will be able to realize the evolution of our BIG-TUNA series with its lightness and outstanding balance, allowing anglers to cast all day long. Furthermore, the bending point is set close to the body enabling anglers to easily bend in and capitalize on the butt power with little effort.
| Target | Tuna~80㎏・KingFish |
|---|---|
| Specification | SiC Ocean Guide (Fuji) |
| DragMax | 15kg/45° |
Suitable reel size S・D：14000~18000 / D：5500~6500
Grip length / A：833mm(Grip full length)・B：520mm(From grip end to reel foot)
Dia of tip / 3.3mm(Just below top guide) ・Dia of butt / 14.6mm (Butt diameter measured 915mm from the bottom)
Reel seat / DPS20(Fuji) Down Lock
BIG TUNA 86 JAPAN Special
If you require long and accurate casting with a heavy class tackle, this 86 will be your choice. In comparison to your ordinary heavy tackle, the flexible tip on the 86 will allow for easier casting of smaller lures when the bait-fish are small though the Tuna are huge. The bending point (pivotal point) is closer to the body allowing anglers to take initiative during the fight.
| Target | TUNA～100kg |
|---|---|
| Specification | Super Ocean Guide(Fuji) |
| DragMax |
15kg/45° |
Suitable reel size S・D：18000~30000
Grip length / 833mm(Grip full length)・520mm(From grip end to reel foot)
Dia of tip / 3.3mm(Just below top guide)・Dia of butt / 15.9mm (Butt diameter measured 920mm from the bottom of tip section)
Reel seat / DPS20（Fuji）Down Lock
Grip end / BRC22
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
The Ripple Fisher Big Tuna Japan Special range represents the pinnacle of offshore rod design, built specifically for anglers chasing the largest and most powerful tuna species in the world. Developed through years of testing with experienced anglers and charter operators, this series is designed to meet the demands of modern big game fishing.
At its core, the Big Tuna series focuses on achieving the balance between casting performance and extreme lifting power. Using advanced carbon materials and refined taper designs, these rods are built to handle high drag pressures while still allowing anglers to cast effectively when fish are feeding on the surface.
The latest Japan Special models have been updated to reflect the evolution of tuna fishing. With anglers now regularly fishing heavy PE lines and targeting larger fish, these rods are designed to remove previous limitations. They allow for techniques such as straight pumping and sustained high drag pressure, giving anglers the ability to control and lift fish from depth more efficiently.
Each model in the range is tuned for specific applications, from long casting situations through to heavy fight-focused setups. Rather than simply increasing power, Ripple Fisher has focused on combining different carbon materials and taper designs to create rods that load correctly, recover efficiently and maintain strength throughout the blank.
On the water, the result is a rod that feels powerful but controlled. It allows you to cast lures effectively, stay connected to the fish and apply pressure when it matters most. The strong butt section provides lifting power, while the overall balance reduces angler fatigue during long fights.
Whether you’re targeting bluefin tuna exceeding 100kg or pushing into extreme heavy tackle scenarios, the Ripple Fisher Big Tuna Japan Special range is built to handle it. This is a serious rod series for anglers who demand performance at the highest level.
FEATURES AND BENEFITS
Advanced carbon blank construction delivers extreme strength and lifting power, allowing anglers to handle large tuna under high drag pressure.
Refined taper design improves load distribution and recovery, enhancing both casting performance and fighting ability.
Designed for heavy PE line classes, supporting modern big game fishing techniques and high drag applications.
Powerful butt section provides the strength needed to lift fish from depth while maintaining control during long fights.
Balanced rod design reduces angler fatigue, allowing for extended fishing sessions in demanding offshore conditions.
Model-specific tuning ensures the range covers both long casting and heavy fight-focused applications.
Developed through real-world testing with anglers and charter operators, ensuring proven performance on large tuna species.
BIG TUNA 85F JAPAN Special
This 85F will allow anglers to cast out small lures with great distance with the use of lines between PE3~6 and lures ranging from 18g ~ 120g. It is a tenacious and bendy rod so it is less likely for anglers to break the rod when high sticking. Use of general light tuna rods result in a long and grueling fight as angles are worried about rod breakage or line breakages, however, this 85F is not a light tackle rod. It is a new generation of tuna rods which exceed the line and knot breakage specifications. Although it possesses the power to overcome Tuna exceeding 50kg, this tolerant rod will also be ideal for casting for targets such as Yellow-tails and Kingfish in your local waters.
| Target | Tuna～50㎏・Kingfish |
|---|---|
| Specification | Titanium frame K Guide + Super Ocean Guide（Fuji） |
| DragMax | 10kg/45° |
Suitable reel size S・D：8000~14000 / D：4500~6500
Grip length / 798mm(Grip full length)・520mm(From grip end to reel foot)
Dia of tip / 2.5mm(Just below top guide)・Dia of butt / 14.3mm (Butt diameter measured 867mm from the bottom of tip section)
Reel seat / DPS20（Fuji）Down Lock
BIG TUNA 87AS JAPAN Special
As its name suggests, the AS (Accuracy Shot) model is designed to accurately cast lures into the feeding fish. In addition to the steady blank kick-back after casting, Ripple Fisher have equipped two RV guides on the butt enabling an extremely smooth line ejection from the reel through to the rod. The casting ability will support anglers when the feeding frenzy is far or in heavy conditions casting into the wind. It is not only able to cast large lures but the blank will also allow the use of small 40g size lures. This middle class rod will assist anglers with its taper design ideal to slowly but surely lift the fish from the deep while being able to high-stick the rod. It is an ideal rod to target Tuna around 50~60kg.
| Target | TUNA ~70kg・Kingfish |
|---|---|
| Specification | SiC-S Titanium frame K Guide + RV Guide（Fuji） |
| DragMax | 15kg/45° |
Suitable reel size S・D：14000~18000
Grip length / A：838mm(Grip full length)・B：520mm(From grip end to reel foot)
Dia of tip / 3.1mm(Just below top guide) ・Dia of butt / 15.1mm (Butt diameter measured 915mm from the bottom)
Reel seat / DPS20(Fuji) Down Lock
BIG TUNA 83 JAPAN Special
This model was developed with “lure control” and “fight” as its main focus, but it goes without saying that casting is also outstanding. It is a PE6~8 middle class rod not only able to pinpoint cast but also able to utilize small mouthed diving poppers and diving pencils required for an attack. You will be able to realize the evolution of our BIG-TUNA series with its lightness and outstanding balance, allowing anglers to cast all day long. Furthermore, the bending point is set close to the body enabling anglers to easily bend in and capitalize on the butt power with little effort.
| Target | Tuna~80㎏・KingFish |
|---|---|
| Specification | SiC Ocean Guide (Fuji) |
| DragMax | 15kg/45° |
Suitable reel size S・D：14000~18000 / D：5500~6500
Grip length / A：833mm(Grip full length)・B：520mm(From grip end to reel foot)
Dia of tip / 3.3mm(Just below top guide) ・Dia of butt / 14.6mm (Butt diameter measured 915mm from the bottom)
Reel seat / DPS20(Fuji) Down Lock
BIG TUNA 86 JAPAN Special
If you require long and accurate casting with a heavy class tackle, this 86 will be your choice. In comparison to your ordinary heavy tackle, the flexible tip on the 86 will allow for easier casting of smaller lures when the bait-fish are small though the Tuna are huge. The bending point (pivotal point) is closer to the body allowing anglers to take initiative during the fight.
| Target | TUNA～100kg |
|---|---|
| Specification | Super Ocean Guide(Fuji) |
| DragMax |
15kg/45° |
Suitable reel size S・D：18000~30000
Grip length / 833mm(Grip full length)・520mm(From grip end to reel foot)
Dia of tip / 3.3mm(Just below top guide)・Dia of butt / 15.9mm (Butt diameter measured 920mm from the bottom of tip section)
Reel seat / DPS20（Fuji）Down Lock
Grip end / BRC22
